how To make Slide Foto in Web

Go to here http://www.slide.com/

Sign Up and Login :)

[Blackberry] An easy way to save energy

Here you can save Energy Batteries for Any Type Blackberry (Blackberry Bold, Blackberry Curve, Blackberry Curve, Blackberry Torch, Blackberry Curve, Blackberry Strom) ..




1. Go to Menu Options, select Security Options

  

2. Go to the menu "Advanced Security Options"

3. Then select "Memory Cleaning"

4. Select "Enabled"

 

5. Show Icon on Home Screen, select "Yes"

6. If so, press the BB menu icon, then select Save. And click "OK" on the warning that appears.

 








Memory Cleaner will run automatically clear the clipboard and optimizing memory on your BlackBerry. And will automatically run when your BlackBerry is locked or restarted.

But the effect will make your BlackBerry becomes slow when booting, because the Clean Memory will start when the new BlackBerry is switched on. But it would make the system more stable job, because the memory is clear.

If you do not want the old boot, you can make the choice to be disabled and do it manually Memory Clean.
Many activities can be done by the BlackBerry, so that the memory becomes full, and often result in all activities to be felt long. So that BlackBerry users often seek third-party applications to ease memory, prevent memory leak and even maximize the memory penggunana. Namely by using application Booster Memory, Flash Memory or the other.

But not everything is running normally, sometimes even your Blackerry device so hang because the application does not fit.
Here are tips and ways you can use to address the full memory of your BlackBerry with BlackBerry built applications.

Go to "Options" menu, then open "Security Options"

AVIRA PREMIUM 2012 + Crack

You're a lot of computer viruses. just take it I will share Avira Premium Until 2012 + crack

 download Here For Avira :

[Download]

+

[CRACK]

empire & allies complete cheat

Empires & Allies - Build your forces and join your neighbors to defeat the Dark Alliance ..

This bot can
1. build up the  Level Faster Empire & allies
2. Can raise more Coin in Empire  & allies 

3. automatic planting & harvesting
4. automatic help neigbord

Download here : Click!! 
Mirror               : Click !!


How To use This..
1. First Install To your Computer
2. Open The Empire & allies Bot

3. START
4. Login in to Empire & allies Bot  (THIS IS A REAL BOT..NOT A VIRUS AND FAKELOGIN..YOUR ID IS SAVE)
5. Finish And Click START BOT

If u not understand...Comment Here !!

This my Acount :

My facebook : Click here !!

I'm level : 55
Coins    : 35.293.000

and Go to Here http://indo-trick.blogspot.com/2011/09/mass-gift-material-empire-allies.html  for

Mass Gift Material Empire & allies

Facebook Chat to restore the Old version

Somehow and for what purpose it's Facebook Chat makes it look like now,, hehe seh if I prefer the look of old chat, how about you?

nah actually want to post about how long balikin chat to the old facebook let ga ribet (I think) ga tau dah if teman2 who prefer the look now..

Now we can restore the look of his chat up with no add ons that are installed into our browser.

Display the picture above is my Facebook Chat in Mozilla Firefox .. loh if its only just the add ons for Firefox? if that's his question then my answer is: D This plugin is now available for the top 3 browsers, ie Firfox Mozilla, Opera and Google Chrome, now for those who want to return the Facebook Chat to the old version please download it in accordance with the Add Ons you use Browser
Download Add Ons Firefox
Download Add Ons Opera
Download Untuk Browser Chrome

Good Luck..!!

How To Fast Buffering Youtube

Maybe you often bored waiting for buffering on Youtube quite time consuming, to make fast buffering or even you can watch without any buffering.

Use Firefox for more leverage. Download software video accelerator or SpeedBit  http:/ / www.videoaccelerator.com/download/
In order to accelerate the SpeedBit follow the way below:

1. Download Firefox AddOn, "GreaseMonkey"

2. Open your web http://userscripts.org/scripts/show/33042, and click install, then click install again, refresh the youtube video that you watched. Youtube Enhancer script will exit. After that open link http: / / userscripts.org/scripts/show/26062, and click install, then click install again. It aims if there is a new update script Youtube Enhancer, a warning message will appear at the top FIREFOX. Making it easier for us to install a new script Youtube Enhancer by clicking the install button.

3. Under View the video of the note in Very Low Quality (flv), click it. After that, there are numbers 640, 960, etc., to change the size of the video. In addition there is a picture of the skull to stop buffering, so fast is bufferingnya View In Very Low Quality (flv).

How to Create a Website with Facebook Like This

Ok. In this article, I will try to explain briefly how to create websites that are equipped boxes like this or facebook facebook like, like the one at the box right of this page.

The first step is you have to make the fanpage first. Of course I am assuming that you already have a facebook account. Make this fan page from the main login page facebook on facebook.com.

When finished, go to the fanpage page and note the address listed at the place you used to write the website address in your browser.

There was a fanpage address you, and copy the numbers at the end of the address. This is the page id facebook fanpage you.

You can use a fanpage for the community when asked to choose.

Once ok, please go to this page http://developers.facebook.com/docs/reference/plugins/like-box facebook developers

You can choose whether to form a button or box and customize the display as desired. Paste the numbers you copied earlier into the field facebook page id.

Once done, click Get Code.

The next step is to copy the code from facebook to your web page. If you pake joomla or mambo like this prothelon.com, just create a new HTML module, and paste the code facebook is there..

Good luck.

Mass Gift Material Empire & allies

Materials from the factory to Boost Empires and Allies! by Vincent! That's enough to make the full offensive and defensive boost:). Consider using the forum Empires and Allies in case of problems or questions or trick. On our side is still not received at the factory to boost but we still images shown to you if you are in the same situation as us! Share article with your friends to also benefit. Join our facebook page for trick or not miss any good plan already has more than 42 000. If you want energy drink, energy, war bonds or materials for your boosts and better on the page go to page 1 1 Empires and Allies

 - The plant to boost costs 1000 coins, 10 100 wood and uranium!
 - The plant operates as a boost to research lab. Basically you'll have to make requests to your friends to      make a boost. ! We can even make boosts Level 3!
      

    Vincent has created this list of materials! You can also find it on page objects Empires and allies (within a few minutes!)
     Wrench, flash grenades, printed circuit cards, blinding grenade, hazmat suit, C4 detonator referred lase, electricity supply, mini radar signal, EMC, gas detector, flash grenade

Ties of materials for the boost empires and allies:

IMPORTANT: Some boost materials such as screws, drills and C4 detonator can be obtained quickly on page 1 for 1 Empires and Allies  

 ClickHere !!

Clik Here !!

Click Here !!

Click Here !!

Click Here !!

Click Here !!

Click Here !!

Click Here !!

Click Here !!

Click Here !!

Click Here !!

Click here !!

Click Here !!

 

Click here

Click here !!

10 reasons why PCs crash U must Know

Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1.Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is http://www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2.Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3.BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4.Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5.Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6.Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( http://www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( http://www.symantec.com).

7.Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8.Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from http://www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9.Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from http://www.computernerd.com or http://www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10.Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

10 reasons why PCs crash U must Know

Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1.Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is http://www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2.Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3.BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4.Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5.Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6.Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( http://www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( http://www.symantec.com).

7.Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8.Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from http://www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9.Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from http://www.computernerd.com or http://www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10.Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

Free proxy search engine

hi guys..i believe most of you already knows about this site http://spys.ru/en/. but for somebody else that still looking for good free proxy search engine, maybe this site can be one of your choice..

i already tested this site with mae and ulul (another HN members) and its work!!. on this site you can find thousands free ip proxy that suitable for your purpose.

if you want to choice free speedy proxy that provide by PT TE*KOM Indon*sia..maybe you want to get speed connection but if you concern about carding, paypal or something else you can change another country IP

Go to Search :

1. just type this site
2. choose country: ID-indonesia
3. for Anonymity you have seceral options but i suggest "only HIA"
4. you can change option for "last" number of IP that you want to
search or just leave 100
5. click "search proxies"
6. wait for view seconds and the site will show up the IP
7. take one of the IP that provide by sp*edy and put on your browser
setting
8. test your search engine ex: google
9. if you want to make sure the connection speed, you can choice
http://www.speedtest.net



Several IP mightbe slower than others. I suggest to choice proxy IP that closer to your area for best result and than check the speed. this site will update free proxy every single hour so you can change to another IP if you feel the current IP slowing down.

by : black^shadow

Free proxy search engine

hi guys..i believe most of you already knows about this site http://spys.ru/en/. but for somebody else that still looking for good free proxy search engine, maybe this site can be one of your choice..

i already tested this site with mae and ulul (another HN members) and its work!!. on this site you can find thousands free ip proxy that suitable for your purpose.

if you want to choice free speedy proxy that provide by PT TE*KOM Indon*sia..maybe you want to get speed connection but if you concern about carding, paypal or something else you can change another country IP

Go to Search :

1. just type this site
2. choose country: ID-indonesia
3. for Anonymity you have seceral options but i suggest "only HIA"
4. you can change option for "last" number of IP that you want to
search or just leave 100
5. click "search proxies"
6. wait for view seconds and the site will show up the IP
7. take one of the IP that provide by sp*edy and put on your browser
setting
8. test your search engine ex: google
9. if you want to make sure the connection speed, you can choice
http://www.speedtest.net



Several IP mightbe slower than others. I suggest to choice proxy IP that closer to your area for best result and than check the speed. this site will update free proxy every single hour so you can change to another IP if you feel the current IP slowing down.

by : black^shadow

How to Download Videos From YouTube

Download the program
Click here to download latest version of the KeepVid for Windows (1.142). *updated 13/08/2011*

Running the program
After you download the KeepVid program, you will need to purchase a license to activate the program and start downloading videos.
Please note that the program works on Windows only...

Frequently Asked Questions

Do I need anything else to make the program work?
If you are using Windows XP or lower, you may need to install Microsoft .NET which is free, to enable the program to work with your system.

What sites does the program support?
YouTube, DailyMotion, Google Video, Megavideo, Metacafe and Vimeo.

Why can't I download certain videos?
Some videos are not available for download due to some of the following reasons:

• it is blocked in your country or restricted to a country


• it has an age restriction


• you can't access the website you are downloading from

What happens if the program stops working?
If the program does not work due to issues with downloading within the program, we will endeavor to make a fix for this as soon as possible. Failing this, we will do our best to offer any solution we can via our website.